- Home
- Products
Products
Gas hose, metal-braided hose, underfloor heating pipe, solar pipe, automotive parts and PE warning plates — extruded, braided, moulded and machined under one roof.
Gas Pipe & Hose
CJ/T 490 · DN10–DN20 · brass fittings
View all
Metal-Braided Hoses
SUS 304 braid · brass or SS fittings
View all
Underfloor Heating Pipe
PE-RT I/II · PEX-a · dn16–dn20
View all
Solar Water Heater Pipe
Pre-insulated · UV stable · -30 to +95 °C
View all
Automotive Parts
Nylon tube · rubber seals · conduit
View all
PE Warning Protection Plate
PE steel-strip plate · bury warning
View allGas Pipe & Hose
The product line this factory was built on. Gas appliance connection hoses in metal-covered, rubber-composite and corrugated stainless construction, plus the buried PE gas pipe that feeds the building. Every coil is pressure-tested before it is packed.
Metal-Covered Gas Appliance Connection Hose
A stainless corrugated core under a flame-retardant yellow PVC sheath, with brass hex-nut fittings on both ends. The standard choice for cookers, water heaters and gas meters indoors.
SpecificationsLong-Life Rubber Composite Gas Hose
A rubber core with an embedded reinforcement layer and a UV-stable yellow cover, built for a 10-year service life in kitchens and light commercial use.
SpecificationsCorrugated Stainless Steel Gas Hose
Bare or sleeved corrugated stainless hose for concealed runs and higher-pressure drops, cut and fitted to the site measurement.
SpecificationsPE 100 Buried Gas Distribution Pipe
Black PE 100 pipe with yellow co-extruded stripes for underground gas distribution, supplied in coils or straight lengths with matching electrofusion and butt fittings.
SpecificationsMetal-Braided Hoses
Stainless braid over a rubber or PTFE core, for water, steam and gas lines that see vibration, pressure spikes or repeated movement. Assembled and tested on our own braiding and crimping lines.
Stainless Braided Water Hose
The everyday flexible connector for taps, basins and water heaters — EPDM core, SUS 304 braid, brass nut either end.
SpecificationsCorrugated Metal Hose Assembly
Annular corrugated stainless hose with braid and welded flanges or threaded ends, for pump connections and pipework that moves.
SpecificationsArmoured Anti-Explosion Gas Hose
A gas hose with an interlocked steel armour layer over the sheath, for public and commercial installations where mechanical damage is a real risk.
SpecificationsUnderfloor Heating Pipe
Oxygen-barrier and standard underfloor heating pipe in PE-RT and PEX, supplied in 200 m and 300 m coils with the loop length pre-marked so the installer can cut without waste.
PE-RT Type I Heating Pipe
The workhorse pipe for residential floor heating — flexible enough to bend by hand, welded with standard fittings, no cross-linking step required.
SpecificationsPE-RT Type II Heating Pipe
Higher temperature and pressure rating than Type I, for district heating connections and systems running above 70 °C.
SpecificationsPEX-a Cross-Linked Heating Pipe
Engel-method cross-linked pipe with the tightest memory in the family — it returns to shape after a kink, which is why installers like it on awkward sites.
SpecificationsSolar Water Heater Pipe
Pre-insulated twin pipe for solar collectors: a PEX or stainless inner pipe, closed-cell insulation and a UV-stable outer sheath, so the run from roof to tank loses as little heat as possible.
Pre-Insulated Solar Twin Pipe
Supply and return in one sheath — one trench, one clip run, half the labour. The usual choice for split solar water heaters.
SpecificationsSolar Collector Circulation Pipe
Single pre-insulated pipe for larger collector arrays and pumped circulation loops, with a stainless option for glycol-filled systems.
SpecificationsSolar-Grade PEX Pipe (Bare)
Bare high-temperature PEX for installers who insulate on site — usually specified where the pipework is buried or boxed in.
SpecificationsAutomotive Parts
Injection-moulded and extruded parts for tier-2 automotive supply: nylon fuel and air tubes, rubber seals, and corrugated conduit for wiring harnesses. Tooling can be developed from a drawing.
Nylon Fuel & Air Tube
PA11 / PA12 extruded tube for fuel lines and air brake circuits, formed to shape and fitted with quick connectors.
SpecificationsMoulded Rubber Seals & Grommets
NBR, EPDM and silicone grommets, boots and seals moulded to drawing, with the compound chosen for the fluid it will actually meet.
SpecificationsCorrugated Wiring Conduit
Slit and unslit corrugated PP or PA conduit for harness protection in the engine bay and underbody.
SpecificationsPE Warning Protection Plate
The yellow-and-black plate that goes in the trench above a buried gas line, so the next person with an excavator knows what is underneath. Rigid PE with a steel strip detectable from the surface.
PE Steel-Strip Warning Plate
Rigid PE plate with a galvanised steel strip laminated inside, printed with the buried-line warning and detectable from above ground.
SpecificationsPE Protection Plate (Plain)
The same rigid PE plate without the steel strip, used as a physical barrier against backfill damage where tracing is handled elsewhere.
SpecificationsPE Warning Tape
The lighter, cheaper alternative for shallow trenches and short runs, printed and folded so it can be laid from a spool without twisting.
SpecificationsSend a sample or a drawing. Get a real answer.
Our engineers quote from your specification — bore, length, fitting and the gas or fluid it will carry. Tell us the application and we will tell you which construction actually holds, including when the cheaper one does.
